Glossary

Amylograph

Amilograph is a fundamental rheological measuring device used in the baking industry to evaluate flour starch structure, gelatinization behavior, and alpha-amylase (α\alpha-amylase) activity.

1. Working Principle and Device Setup

  • Suspension Preparation: A homogenous flour-water slurry is prepared by mixing a specified ratio of flour with distilled water.
  • Controlled Heating and Rotation: The slurry is stirred inside a rotating bowl fitted with pin-based paddles while heating up at a fixed, controlled rate (typically 1.5 °C/min or 5 °C/min).
  • Viscosity Measurement: As the temperature rises, starch granules absorb water and swell (gelatinize), increasing the fluid's flow resistance. The instrument continuously records this resistance against time and temperature to yield a characteristic curve (Amilogram) expressed in Amylograph Units (AU) or Brabender Units (BU).

2. Key Parameters Extracted from the Amilogram

  • Gelatinization Onset Temperature (TgT_g, °C): The baseline temperature at which starch granules start swelling and initial viscosity increases (typically around 55–63 °C for wheat flour).
  • Peak Viscosity (PVmax, BU / AU): The maximum viscosity reached during heating. This is the most critical parameter for evaluating both the starch's gelling capability and the intrinsic alpha-amylase activity.
  • Peak Temperature (°C): The exact temperature recorded at the point of maximum viscosity.
  • Breakdown (BU): The drop in viscosity observed as continuous thermal and mechanical shearing ruptures the swollen starch granules.
  • Setback (BU): The secondary viscosity increase during the cooling phase, driven by retrogradation (re-alignment and recrystallization of dissolved amylose molecules forming a gel structure).

3. Alpha-Amylase Activity and Effects on Bread Quality

Peak viscosity on an Amilogram is inversely proportional to alpha-amylase activity:

  • Low Peak Viscosity (< 300–400 BU):

    • Indicates: Excessive alpha-amylase activity (e.g., sprout-damaged wheat) or high levels of damaged starch.
    • Impact: Rapid enzymatic breakdown liquefies gelatinized starch during baking. The resulting bread suffers from a sticky, gummy crumb, poor structure retention, and potential collapse.
  • High Peak Viscosity (> 800–1000 BU):

    • Indicates: Deficient alpha-amylase activity.
    • Impact: Insufficient starch hydrolysis starves yeast of fermentable sugars (maltose, glucose). This leads to sluggish fermentation, poor oven spring, pale crust color, and lower loaf volume.
  • Optimum Baking Range (500–800 BU): Standard breadmaking flours perform best when peak viscosity falls roughly between 500 and 700 BU, delivering an optimal crumb texture, balanced elasticity, and good volume.

4. Correlation with Other Quality Metrics

  • Falling Number (FN): Amilograph peak viscosity shows a strong positive correlation (r≈0.975r \approx 0.975) with the Falling Number test. Low peak viscosity directly aligns with low FN values.
  • Damaged Starch: Higher levels of mechanically damaged starch during milling lower the peak viscosity, as damaged granules absorb water more rapidly and are far more susceptible to immediate enzymatic attack.
The Breadpedia letter

Bread science, baked fresh for your inbox.

One short email whenever a new post is out — wheat, milling, dough and baking, explained in plain language.

Free, sent through Substack. Unsubscribe in one click.

Loading…